Importance of trabecular anisotropy in finite element predictions of patellar strain after Total Knee Arthroplasty

Patellar fracture and anterior knee pain remain major complications after Total Knee Arthroplasty (TKA). Patient-specific finite element (FE) models should help improve understanding of these complications through estimation of joint and bone mechanics. However, sensitivity of predictions on modeling tech- niques and approaches is not fully investigated. In particular, the importance of patellar bone anisotropy, usually omitted in FE models, on strain prediction is still unknown. The objective of this study was thus to estimate the influence of modeling patellar trabecular anisotropy on prediction of patellar strain in TKA models. We compared FE-derived strain predictions with isotopic and anisotropic material properties using 17 validated FE models of the patella after TKA. We considered both non-resurfaced and resurfaced patellae, in a load-bearing TKA joint. We evaluated and compared the bone volume above a strain threshold and, in addition, estimated if the difference in isotopic and anisotropic predictions was consistent between patellae of different average bone volume fraction. Compared to the anisotropic reference, the isotropic prediction of strained volume was 3.7 ± 1.8 times higher for non-resurfaced patellae and 1.5 ± 0.4 times for resurfaced patellae. This difference was higher for patellae with lower average bone volume fraction. This study indicates that strain predictions acquired via isotropic patellar FE models should be inter- preted with caution, especially when patellae of different average bone volume fraction are compared

Plasticity of fetal cartilaginous cells.

Tissue-specific stem cells found in adult tissues can participate in the repair process following injury. However, adult tissues, such as articular cartilage and intervertebral disc, have low regeneration capacity, whereas fetal tissues, such as articular cartilage, show high regeneration ability. The presence of fetal stem cells in fetal cartilaginous tissues and their involvement in the regeneration of fetal cartilage is unknown. The aim of the study was to assess the chondrogenic differentiation and the plasticity of fetal cartilaginous cells. We compared the TGF-β3-induced chondrogenic differentiation of human fetal cells isolated from spine and cartilage tissues to that of human bone marrow stromal cells (BMSC). Stem cell surface markers and adipogenic and osteogenic plasticity of the two fetal cell types were also assessed. TGF-β3 stimulation of fetal cells cultured in high cell density led to the production of aggrecan, type I and II collagens, and variable levels of type X collagen. Although fetal cells showed the same pattern of surface stem cell markers as BMSCs, both type of fetal cells had lower adipogenic and osteogenic differentiation capacity than BMSCs. Fetal cells from femoral head showed higher adipogenic differentiation than fetal cells from spine. These results show that fetal cells are already differentiated cells and may be a good compromise between stem cells and adult tissue cells for a cell-based therapy

Stability Enhancement Using Hyaluronic Acid Gels for Delivery of Human Fetal Progenitor Tenocytes.

Tendon afflictions are very common, and their negative impact is high both at the workplace and in leisure activities. Tendinopathies are increasing in prevalence and can lead to tendon ruptures, where healing is a long process with outcomes that are often disappointing. Human fetal progenitor tenocytes (hFPTs) have been recently tested in vitro as a potential cell source to stimulate tendon regeneration. The aim of the present study was to compare different commercial hyaluronic acid (HA) gels, which could be used to resuspend hFPTs in a formulation that would allow for good delivery of the cells. No medium or growth supplement was used in the formulation in order to make it therapeutically dispensable. These conditions are stringent for cells, but surprisingly, we found that different formulations could allow a good survival for up to 3 days when stored at 4°C (refrigerator stable). The gels must allow a good survival of the cells in parallel with a good stability of the preparation over time and sufficient viscosity to remain in place if deposited on a wounded location. Moreover, the cells must conserve their ability to attach and to proliferate. hFPTs were able to survive and to recover from all of the tested gels, but some products showed some advantages over others in terms of survival and viscosity. Finally, the Ostenil Tendon HA gel fulfilled all of the requirements and presented the best compromise between a good survival and sufficient rheological characteristics to create an interesting cell delivery system

Osteogenesis imperfecta: from diagnosis and multidisciplinary treatment to future perspectives.

Osteogenesis imperfecta is an inherited connective tissue disorder with wide phenotypic and molecular heterogeneity. A common issue associated with the molecular abnormality is a disturbance in bone matrix synthesis and homeostasis inducing bone fragility. In very early life, this can lead to multiple fractures and progressive bone deformities, including long bone bowing and scoliosis. Multidisciplinary management improves quality of life for patients with osteogenesis imperfecta. It consists of physical therapy, medical treatment and orthopaedic surgery as necessary. Medical treatment consists of bone-remodelling drug therapy. Bisphosphonates are widely used in the treatment of moderate to severe osteogenesis imperfecta, from infancy to adulthood. Other more recent drug therapies include teriparatide and denosumab. All these therapies target the symptoms and have effects on the mechanical properties of bone due to modification of bone remodelling, therefore influencing skeletal outcome and orthopaedic surgery. Innovative therapies, such as progenitor and mesenchymal stem cell transplantation, targeting the specific altered pathway rather than the symptoms, are in the process of development

Anti-Microbial Dendrimers against Multidrug-Resistant P. aeruginosa Enhance the Angiogenic Effect of Biological Burn-wound Bandages.

Multi-drug resistant Pseudomonas aeruginosa has increased progressively and impedes further regression in mortality in burn patients. Such wound infections serve as bacterial reservoir for nosocomial infections and are associated with significant morbidity and costs. Anti-microbial polycationic dendrimers G3KL and G3RL, able to kill multi-drug resistant P. aeruginosa, have been previously developed. The combination of these dendrimers with a class of biological bandages made of progenitor skin cells, which secrete growth factors, could positively impact wound-healing processes. However, polycations are known to be used as anti-angiogenic agents for tumor suppression. Since, neovascularization is pivotal in the healing of deep burn-wounds, the use of anti-microbial dendrimers may thus hinder the healing processes. Surprisingly, we have seen in this study that G3KL and G3RL dendrimers can have angiogenic effects. Moreover, we have shown that a dendrimer concentration ranging between 50 and 100 μg/mL in combination with the biological bandages can suppress bacterial growth without altering cell viability up to 5 days. These results show that antimicrobial dendrimers can be used in combination with biological bandages and could potentially improve the healing process with an enhanced angiogenesis

Effect of temporal onsets of mechanical loading on bone formation inside a tissue engineering scaffold combined with cell therapy.

Several approaches to combine bone substitutes with biomolecules, cells or mechanical loading have been explored as an alternative to the limitation and risk-related bone auto- and allo-grafts. In particular, human bone progenitor cells seeded in porous poly(L-lactic acid)/tricalcium phosphate scaffolds have shown promising results. Furthermore, the application of mechanical loading has long been known to be a key player in the regulation of bone architecture and mechanical properties. Several in vivo studies have pointed out the importance of its temporal offset. When an early mechanical loading was applied a few days after scaffold implantation, it was ineffective on bone formation, whereas a delayed mechanical loading of several weeks was beneficial for bone tissue regeneration. No information is reported to date on the effectiveness of applying a mechanical loading in vivo on cell-seeded scaffold with respect to bone formation in a bone site. In our study, we were interested in human bone progenitor cells due to their low immunogenicity, sensitivity to mechanical loading and capacity to differentiate into osteogenic human bone progenitor cells. The latest capacity allowed us to test two different bone cell fates originating from the same cell type. Therefore, the general aim of this study was to assess the outcome on bone formation when human bone progenitor cells or pre-differentiated osteogenic human bone progenitor cells are combined with early and delayed mechanical loading inside bone tissue engineering scaffolds. Scaffolds without cells, named cell-free scaffold, were used as control. Surprisingly, we found that (1) the optimal solution for bone formation is the combination of cell-free scaffolds and delayed mechanical loading and that (2) the timing of the mechanical application is crucial and dependent on the cell type inside the implanted scaffolds

Variability of the pullout strength of cancellous bone screws with cement augmentation

Background Orthopaedic surgeons often face clinical situations where improved screw holding power in cancellous bone is needed. Injectable calcium phosphate cements are one option to enhance fixation. Methods Paired screw pullout tests were undertaken in which human cadaver bone was augmented with calcium phosphate cement. A finite element model was used to investigate sensitivity to screw positional placement. Findings Statistical analysis of the data concluded that the pullout strength was generally increased by cement augmentation in the in vitro human cadaver tests. However, when comparing the individual paired samples there were surprising results with lower strength than anticipated after augmentation, in apparent contradiction to the generally expected conclusion. Investigation using the finite element model showed that these strength reductions could be accounted for by small screw positional changes. A change of 0.5 mm might result in predicted pullout force changes of up to 28%. Interpretation Small changes in screw position might lead to significant changes in pullout strength sufficient to explain the lower than expected individual pullout values in augmented cancellous bone. Consequently whilst the addition of cement at a position of low strength would increase the pullout strength at that point, it might not reach the pullout strength of the un-augmented paired test site. However, the overall effect of cement augmentation produces a significant improvement at whatever point in the bone the screw is placed. The use of polymeric bone-substitute materials for tests may not reveal the natural variation encountered in tests using real bone structures.Dr V. Stadelmann (AOR, Davos, Switzerland) and Mr. M. Behrens (Stryker, Selzach, Switzerland). Professor Procter and Dr Arnoldi were employed by Stryker Trauma. Dr Bennani's PhD studies at Brunel University were funded by Stryker Trauma AG

Colloquium: Mechanical formalisms for tissue dynamics

The understanding of morphogenesis in living organisms has been renewed by tremendous progressin experimental techniques that provide access to cell-scale, quantitative information both on theshapes of cells within tissues and on the genes being expressed. This information suggests that ourunderstanding of the respective contributions of gene expression and mechanics, and of their crucialentanglement, will soon leap forward. Biomechanics increasingly benefits from models, which assistthe design and interpretation of experiments, point out the main ingredients and assumptions, andultimately lead to predictions. The newly accessible local information thus calls for a reflectionon how to select suitable classes of mechanical models. We review both mechanical ingredientssuggested by the current knowledge of tissue behaviour, and modelling methods that can helpgenerate a rheological diagram or a constitutive equation. We distinguish cell scale ("intra-cell")and tissue scale ("inter-cell") contributions. We recall the mathematical framework developpedfor continuum materials and explain how to transform a constitutive equation into a set of partialdifferential equations amenable to numerical resolution. We show that when plastic behaviour isrelevant, the dissipation function formalism appears appropriate to generate constitutive equations;its variational nature facilitates numerical implementation, and we discuss adaptations needed in thecase of large deformations. The present article gathers theoretical methods that can readily enhancethe significance of the data to be extracted from recent or future high throughput biomechanicalexperiments.Comment: 33 pages, 20 figures. This version (26 Sept. 2015) contains a few corrections to the published version, all in Appendix D.2 devoted to large deformation

Bone tissue engineering using foetal cell therapy.

Different cell sources for bone tissue engineering are reviewed. In particular, adult cell source strategies have been based on the implantation of unfractionated fresh bone marrow; purified, culture expanded mesenchymal stem cells, differentiated osteoblasts, or cells that have been modified genetically to express rhBMP. Several limiting factors are mentioned for these strategies such as low number of available cells or possible immunological reaction of the host. Foetal bone cells are presented as an alternative solution and review of actual treatments using these cells is presented. Finally, foetal cells used specifically for bone tissue engineering are characterised and potentially interesting therapeutic options are proposed